AKG C-451B small diaphragm micro stereo pair

(Including tax)
In stock
Add to wish list

Product informatie

AKG C-451B small diaphragm micro stereo pair


C 451 B/ST

Matched pair of C 451 B

Thematched pairs consist of two microphones that are within 1 dB to eachother in sensitivity and also within 1 dB to each other in the range of200 Hz to 15,000 Hz of the individual frequency response when used incardioid mode and are selected from a large quantity of individualmicrophones using the described criteria by using a proprietarycomputer program.

Using this matched pair for stereo recordingsutilizing various techniques will provide for a good and stable balancewithout frequency-dependent shifting of the stereo panorama.

Thekit includes all the standard accessories of the individual packagealong with a stereo bar and proof of performance charts in anattractive carrying case (Soundtool case, middle size).

Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 9 mV/Pa (-41 dBV)
Max. SPL 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio (A-weighted) 76 dB
Preattenuation pad 0 dB, 10 dB, 20 dB selectable
Bass filter flat, 12 dB/octave at 75 or 150 Hz, selectable
Impedance <200 ohms
Recommended load impedance >1000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption <2 mA
Connector 3-pin XLR
Finish satin nickel plated
Net weight 125 g / 4.4 oz.
Shipping weight 760 g / 1.7 lbs.
Patent(s) Electrode support for condenser transducer (Patent no. AT 392.182, DE 4.021.661)

Professional condenser microphone with gradient capsule. Itsapplication range shall include instrument miking and recording, liverecording, live sound reinforcement, lecterns and places ofworship.Frequency range: 20-20,000 Hz; sensitivity 9 mV/PA at 1 kHz;electrical impedance: max. 200 ohms; maximum SPL: 155/145/135 dB SPLfor 0.5%.; signal-to-noise ratio: 76 dB-A; switchable preattenuationpad: 0/-10/-20 dB; switchable Bass cut filter slope 12 dB/octave at 75or 150 Hz; The microphone shall be capable of operating on phantompower 9 to 52 V, drawing a current of max. 2 mA. The case shall be19mm(0.75 in.) diameter and 160mm(6.3 in.) in length. The surface shallbe satin nickel plated and the maximum net weight of the microphonesystem shall be 125 g (4.4 oz.).

Klik voor mondkapjes..

Klik voor teflon onderzetter...

Klik voor pianolampen


Moeskops Muziek gehoorbescherming